The SmallRig Field Monitor Mount Holder review centers on a compact cold shoe mount for positioning a 5- or 7-inch camera monitor on a cage or handle.
Its tilting and swiveling adjustments suit operators who want to change the viewing angle without adding a longer articulated arm.
SmallRig Monitor Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder 2905B
A compact adjustable holder for camera operators mounting a 5- or 7-inch monitor or another light accessory on a cage or handle.
- Designed to support 5- and 7-inch camera monitors via a cold shoe on top of a camera cage or handle.
- Tilts up to 180 degrees and swivels 360 degrees for adjusting monitor position.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the provided Allen wrench.
- Built-in locating pins are intended to help secure Ninja V and V+ monitors, while a silicone pad helps prevent scratching and twisting.
Pros
- Broad tilt and swivel adjustment helps place a monitor for different viewing angles.
- Thumbscrew tilt adjustment is convenient during rig setup.
Consider before buying
- The stated load capacity changes with tilt angle, so buyers need to match the guidance to their monitor and chosen position.
- The Allen wrench is needed for swivel tension adjustment and to retighten the top screw.
Read the full review summary
This holder combines a cold shoe base, a 1/4"-20 top screw, and a threaded hole underneath, giving it a few ways to join a camera rig.
It tilts up to 180 degrees and swivels 360 degrees, while a thumbscrew makes tilt tension easier to adjust during setup. A supplied Allen wrench adjusts swivel tension and helps retighten the top screw.
Its design is most relevant to compact camera rigs with a 5- or 7-inch monitor, particularly when a short, direct mount is preferable to a projecting arm.
Built-in locating pins and a silicone pad are intended to help secure compatible monitors and reduce twisting or scratching.
Buyers should take the load guidance seriously: the supported load changes with tilt angle, and the instructions call for retightening the knurled screw with the Allen wrench.
The buying factors
SmallRig Monitor Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Angle adjustment
The holder offers up to 180-degree tilt and 360-degree swivel, with separate tension adjustments.
Mounting flexibility
A cold shoe base and a 1/4"-20 threaded hole underneath support more than one rig connection.
Monitor fit
It is designed for 5- and 7-inch monitors, and the locating pins and silicone pad add monitor-oriented details.
Load guidance
The description gives different maximum loads by tilt angle, so the usable limit depends on setup.
Compactness
At 76 g and a folded size of 78 × 67 × 42 mm, it is a small addition to a rig.
Setup convenience
Tilt tension adjusts by thumbscrew, while swivel tension and final screw tightening require the included Allen wrench.
Key Features and Specifications of SmallRig Monitor Mount
- Designed to support 5- and 7-inch camera monitors via a cold shoe on top of a camera cage or handle.
- Tilts up to 180 degrees and swivels 360 degrees for adjusting monitor position.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the provided Allen wrench.
- Built-in locating pins are intended to help secure Ninja V and V+ monitors, while a silicone pad helps prevent scratching and twisting.
- Cold shoe adapter at the base and a 1/4"-20 threaded hole provide mounting options; the top 1/4"-20 screw can also support a microphone or light.
- Load guidance varies by tilt: under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees, and under 5 lb at 30 degrees. The top knurled screw should be retightened with the Allen wrench.
- The holder weighs 76 g and measures 78 × 67 × 42 mm folded.
Pros and Cons of SmallRig Monitor Mount
Pros
- Broad tilt and swivel adjustment helps place a monitor for different viewing angles.
- Thumbscrew tilt adjustment is convenient during rig setup.
- Locating pins and a silicone pad address monitor movement and surface contact.
- Cold shoe and 1/4"-20 connections support several common rig layouts.
Consider before buying
- The stated load capacity changes with tilt angle, so buyers need to match the guidance to their monitor and chosen position.
- The Allen wrench is needed for swivel tension adjustment and to retighten the top screw.
- The compact mount attaches directly to a cage or handle; buyers wanting a longer reach should check whether this short holder can position the monitor where they need it.
Who Should Buy SmallRig Monitor Mount?
Good fit
Consider this mount if your setup uses a 5- or 7-inch monitor and has a cold shoe available on a cage or handle.
Its tilt and swivel range can make it easier to move the screen into a useful viewing position, while the direct mounting form keeps the connection close to the rig.
It may also suit a small accessory such as a microphone or light, since the top screw supports those devices too.
Before choosing it, compare your device's load and the planned angle against the listed limits, confirm that your rig offers the right connection, and keep the included wrench handy for securing the setup.
Who should skip it
Skip this style if you need a mount with a long extension arm to place a monitor well away from the camera; this holder is a compact direct mount.
If your monitor or accessory approaches the stated limit, or you plan to tilt it sharply, check the angle-specific load guidance and connection fit before relying on this holder.
How the SmallRig Monitor Mount Fits a Camera Rig
Positioning a monitor close to the rig
The holder's 180-degree tilt and 360-degree swivel let the screen face different directions without the arm length of a multi-joint extension.
That compact layout can be useful when the monitor needs to sit near the camera cage or handle. Think through screen visibility and clearance around other rig components before mounting it.
Tension and securing steps
A thumbscrew adjusts tilt tension, while an Allen wrench adjusts swivel tension. The instruction to retighten the top knurled screw with the wrench is a practical setup step, especially after deciding on the final angle.
This means adjustment is partly tool-free, but keeping the wrench with the rig remains useful.
Matching load to angle
The provided limits are angle-specific: under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees, and under 5 lb at 30 degrees.
A buyer should use the limit for the intended tilt position and leave room for the complete mounted accessory setup rather than assuming one maximum applies at every angle.
Choosing the connection
The base slides into a cold shoe, and its 1/4"-20 threaded hole offers another route for a magic arm or stabilizer. The top 1/4"-20 screw accepts the monitor or smaller accessories.
Confirm that the camera cage, handle, or support has a compatible connection and enough clearance for the intended orientation.
Alternatives to SmallRig Monitor Mount
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSMALLRIG Camera Monitor Mount 6313
Consider the 6313 if portrait and landscape mounting are key to your workflow or its listed monitor compatibility better matches your equipment.
Choose the 2905B if its stated 5- and 7-inch monitor fit and angle-specific load guidance suit your setup.
- The 6313 offers 180-degree tilt and 360-degree pan, a cold shoe base, a 1/4"-20 threaded hole, and horizontal or vertical monitor installation.
- It is described for Ninja TX, TX GO, Shinobi II, and other accessories.
- The 2905B is designed for 5- and 7-inch monitors and provides tilt and swivel adjustment, with angle-specific load guidance.
Camera Mounts & Clamps alternative

900+ ratings
Read Amazon ReviewsSMALLRIG Articulating Rosette Arm 1498
The 1498 is the more relevant option when reach from the mounting point matters and an 11-inch arm fits the rig.
The 2905B is a better match when you want a compact monitor holder close to a cold shoe and its angle-specific loading suits the device.
- The 1498 is an 11-inch articulating arm with a shoe base at one end and a 1/4" thread at the other.
- Its description gives a maximum load capacity of 2.8 kg and a best load range of 1.5–2 kg.
- The 2905B is a short, direct holder with a cold shoe base, adjustable tilt and swivel, and a threaded hole underneath.
Is SmallRig Monitor Mount Worth It?
The SmallRig Field Monitor Mount Holder 2905B is worth considering for a compact camera rig that needs an adjustable 5- or 7-inch monitor position.
Its direct cold shoe mounting, broad angle adjustment, and monitor contact details make it a purpose-built fit for that setup.
Check the connection, monitor clearance, and load limit at your intended tilt before buying. The included Allen wrench remains part of setup and adjustment, and operators who need more extension should consider an articulating arm instead.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder 2905B
A compact adjustable holder for camera operators mounting a 5- or 7-inch monitor or another light accessory on a cage or handle.
- Designed to support 5- and 7-inch camera monitors via a cold shoe on top of a camera cage or handle.
- Tilts up to 180 degrees and swivels 360 degrees for adjusting monitor position.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the provided Allen wrench.
- Built-in locating pins are intended to help secure Ninja V and V+ monitors, while a silicone pad helps prevent scratching and twisting.